AMG GT3 Wheel
The project was inspired by Plg_design for making the AMG GT3 wheel. I took it further from there and change some stuff and I came up with the final look of the wheel below. Here you will see each step briefly on how I ended up making the wheel.
Shifter housing printed and assembles using 3d printer.
Full assembly of both left and right shifters using magnets, and switches.
3D printed top cover for the rim along with the holes for push buttons.
Adding Carbon Vinyl for improving the looks for the top cover.
Attaching the shifters to the bottom cover and passing the wires to the inside for later connections.
Finally connecting all pushbuttons as well as the shifters to the USB encoder where it will be connected later to the computer.
https://www.thingiverse.com/thing:3182414